FMG_logo (2)

 

The FMG-HP series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow under high pressure conditions. The meters fully comply with the EN12480 and OIML R137.

The actual meter body is made from aluminum and is kept in position by a steel meter housing. This housing holds the meter body, without any stress, in position between the adjacent flanges. Since the meter body is not affected by stress from the flanges or the piping, the clearances between the impellers and the body are optimized. As such the superb metrological performance achieved in the low pressure FMG rotary meter is maintained under high pressure conditions as well.

Due to the large rangeability of 1:100, the FMG-HP rotary meter is very suitable for small city gate stations as the actual load of this type of station varies widely. Square impellers and improved position of the main bearings makes the cartridge very robust and less
sensitive to flow and pressure shocks.

 

 

Rotary Gas Meter FMR

 

The FMG series of rotary gas meters is designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters fully comply with the EN12480 and OIML R137. A compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge. Square impellers and improved positioning of main bearings and shafts makes the meter less susceptible to overload and pressure shocks.

 

KEY FEATURES

  • Flow rate: 0.5 – 650 m3/h (1.75 – 2,300 cuft/h)
  • DN40 – DN150
  • Flanges: DIN PN 16, ANSI 150 to ANSI 300
  • Rangeabilities > 1 : 160
  • Accuracy class 1 or 1.5
  • Multi position

 

MAIN BENEFITS

  • MID approved for fiscal use by NMi
  • One meter covers all traditional G-values (M values).
  • Exchangeable / on-site replaceable cartridge
  • Easy Local repair / on-site cleaning
  • Low sensitivity to installation stress
  • Tamper proof index
  • Meter can be completely sealed for fiscal security

 

ROTARY METERS SERIES FMR-HP

  • (2” – 4”)
  • ANSI 300 / ANSI 600
  • 1 – 400 m3/h (35 – 16,000 acfh)
  • 1 : 100 Rangeablity
  • Square Impellers
  • Robust Design
  • Easy Local Repair
  • Exchange Cartridge
  • Integrated Bypass
  • Tamper Proof Design
FMG-203 (2)

 

FMG-214 (2)

 

 

FMG-215 (2)

 

 

FMG-220 (2)

 

 

fmg-high-pressure-meters

 

 

FMG, FMT-S COMPACT TURBINE METER LINE

  • DN80 – DN300 (3” – 12”)
  • PN16 – PN100, ANSI150 – ANSI600
  • 8 – 6500 m3/h (300 – 230,000 acfh)

 

Benefits an Features:

 

  • OIML, MID, PED, ATEX APPROVED
  • Suitable for custody transfer sites
  • < 1xD Straight Inlet (approved)
  • Short Meter Body
  • Exchangeable cartridge

 

FMG, FMT-L STANDARD TURBINE METER LINE

  • Sizes: DN80 – DN300 (3” – 12”)
  • Pressure ratings: PN16 – PN100, ANSI150 – ANSI600
  • Capacity Range: 8 – 6500 m3/h (300 – 230,000 acfh)

 

Benefits an Features:

  • OIML, MID, PED, ATEX Approved
  • Suitable for custody transfer sites
  • Exchangeable cartridge

 

FMG, EETM DUAL ROTOR TURBINE METER LINE

 

  • Sizes: DN150 – DN300 (6” – 12”)
  • Pressure ratings: PN16 – PN100, ANSI150 – ANSI600
  • Capacity Range: 20 – 6500 m3/h (135 – 230,000 acfh)
  • Exchangeable cartridge

 

Benefits an Features:

 

  • OIML, MID, PED, ATEX APPROVED
  • Two Meter in one body
  • Continuous Monitoring
  • Auto Diagnostics and alarms
  • Remote index (SFC3000)
  • Electronic Double Index
 

 

 

fmts

 

 

 

 

fmt-l-turbine-meter

 

 

 

 

 

eetm