Taylor Valve Technology^®

The Model IC is an angle body valve that holds a bubble-tight, closed position until pressure reaches an exact set point. At set point, the pin buckles and the valve opens in milliseconds for immediate pressure relief to prevent pump, hose and system damage on mud and slurry pump systems – ideal for pulsating pressure.

The Model IC valve provides safety for a variety of pressure relief applications including but not limited to: mud, slurry, and fracing fluid relief. The valve relieves pressure to prevent pump, hose and system damage on mud and slurry pump systems – ideal for pulsating pressure. Use instead of nitrogen-assisted valves or ball & spring reset valves where you need greater accuracy and reliability. Our hydraulic fracturing and mud and slurry relief valve ranges are exceedingly popular in the Oil & Gas industry.

The Model C-ASME is the ASME-certified version of our angle body Model C relief valve. The Model C-ASME is UD stamped. It holds a bubble-tight, closed position until pressure reaches an exact set point. At set point, the valve instantly opens to relieve pressure from a protected system. The valve features a wide variety of pressure ratings and settings.

The Model C-ASME relief valve is designed specifically to be installed on ASME required systems. It provides safety for a variety of pressure relief applications including but not limited to: Oil and Gas Production, Pipeline, Well Drilling, Chemical Processing, Food Processing, Waste Water Processing, Pharmaceutical Processing, Pulp and Paper Plants, and anywhere that conventional relief valves and rupture discs are used.

The Model A ESV Isolation Valve is an angle body valve that holds a bubble-tight, open position until flowing pressure acting on the unbalanced stem area puts an axial force on the pin. At set point, the pin buckles and the valve closes for a bubble-tight seal. In case of a downstream line break, the mass velocity impinging on the lower piston surface will force the pin to buckle and the valve will seal closed. Unlike conventional valves and rupture discs, the Model “A” proves it is environmentally friendly by keeping you from flaring production or venting production to the atmosphere.

The Model A Isolation valve keeps well pressure from exceeding D.O.T. transmission limits and protects the meter run from excess pressure. It is part of our line of pressure isolation valves is primarily used to prevent damage to downstream equipment including meter houses and line transitions.

The Model JA ESV is an inline valve that holds a bubble-tight, open position until flowing pressure acting on the unbalanced stem area puts an axial force on the pin. At set point, the pin buckles and the valve closes for a bubble-tight seal. This model isolates pressure to prevent downstream damage to equipment and proves it is environmentally friendly by eliminating air and ground pollution common with conventional relief valves.

The Model J-A isolation valve closes at a set pressure to prevent damage to downstream equipment from excess pressure including meter houses and line
transitions.

The Model HPRV is an angle body valve that holds a bubble-tight, closed position until pressure reaches an exact set point. At an exact set point, the pin buckles and the valve opens in milliseconds for immediate pressure relief. Relieves pressure to prevent pump, hose and system damage on frac fluid systems – ideal for pulsating pressure.

The Model HPRV valve provides safety for a variety of pressure relief applications including but not limited to: mud, slurry, and fracing fluid relief. The valve relieves pressure to prevent pump, hose, and system damage on frac fluid systems – ideal for pulsating pressure. Use instead of nitrogen-assisted valves or ball & spring reset valves where you need greater accuracy and reliability. Our hydraulic fracturing and mud and slurry relief valve ranges are exceedingly popular in the Oil & Gas industry.